Cisco AIR PWRINJ7= – 60 W Power Injector for Catalyst & Aironet APs (802.3bt / UPoE)

Cisco AIR PWRINJ7= – 60 W Power Injector for Catalyst & Aironet APs (802.3bt / UPoE)

Cisco AIR-PWRINJ7= is a compact 60 W UPoE (802.3bt) injector that delivers multigigabit data and power over a single Ethernet cable for high-power Cisco access points.

4-Year Warranty | 30 Day Returns | 30 Day Exchange

Product Specification

Specification Details
Product Code AIR‑PWRINJ7=
PoE Standard IEEE 802.3bt (Cisco UPoE), backward compatible
Max Power Output 60 W nominal, 54–57 V DC @ ≤1.161 A
Data Ports 2× RJ‑45 (10/100/1G/2.5G/5G)
Ethernet Speed Support 10 Mb–5 Gb auto‑negotiation
AC Input Range 90–264 VAC, 47–63 Hz; C14 inlet
Dimensions (L×W×H) ≈140×65×38 mm (5.5×2.6×1.5 in)
Weight ≈227 g (8 oz)
Efficiency >88 % @115 VAC, >89 % @230 VAC
No‑Load Power <0.21 W @115 VAC, <0.15 W @230 VAC
Operating Temp –10 °C to +40 °C
Storage Temp –25 °C to +65 °C
Humidity Up to 95 % non-condensing
Protection Short‑circuit, overload, surge protection
Product CodeAIR PWRINJ7=
Dimensions (Length x Width)≈140×65×38 mm (5.5×2.6×1.5 in)
Weight≈227 g (8 oz)
Operating Temperature–10 °C to +40 °C
Storage Temperature–25 °C to +65 °C
Ethernet Ports10 Mb–5 Gb auto negotiation
Ingress ProtectionShort circuit, overload, surge protection
PoE StandardIEEE 802.3bt (Cisco UPoE), backward compatible
Power Output60 W nominal, 54–57 V DC @ ≤1.161 A
Data Ports2× RJ 45 (10/100/1G/2.5G/5G)
HumidityUp to 95 % non-condensing
AC Input Range90–264 VAC, 47–63 Hz; C14 inlet
Efficiency>88 % @115 VAC, >89 % @230 VAC
No Load Power<0.21 W @115 VAC, <0.15 W @230 VAC
Cisco AIR PWRINJ7
Cisco AIR PWRINJ7= – 60 W Power Injector for Catalyst & Aironet APs (802.3bt / UPoE)

Product Overview and Features

The Cisco AIR‑PWRINJ7= is a high‑capacity Power over Ethernet (PoE) midspan injector engineered to support the latest high-power Cisco access points, including Catalyst and Aironet models requiring up to 60 W via Cisco UPoE (802.3bt). It integrates both 5G multigigabit data and power delivery over a single Ethernet cable, eliminating the need for local AC power at access point locations. It dynamically negotiates power, delivering 54–57 V DC at up to 1.161 A, and will only power compliant devices—protecting non‑compliant gear from accidental damage

Encased in a compact, mountable chassis with mounting tabs and a single status LED indicating power states, the AIR‑PWRINJ7= ensures reliable operation with high MTBF and worldwide AC compatibility while supporting fast Ethernet speeds up to 5 Gb/s. This injector is ideal for powering high-end Wi‑Fi 6/6E access points, IP cameras, network convergence hardware, and multigigabit DSLAMs in environment where power access is limited or costly.

What’s in the Box

  • 1× Cisco AIR‑PWRINJ7= power injector
  • Quick-installation and mounting guide

Use Case Scenarios

  1. Catalyst 9100 and 9200 Series AP deployments without PoE switches
  2. High-performance outdoor APs needing 60 W power
  3. Audio-video systems requiring fast data and PoE
  4. Network convergence devices like NCS routers or edge switches
  5. Multigigabit capable IP cameras and security sensors
  6. Remote deployments and pop-up wireless networks
  7. Industrial mesh root nodes with high power demands
  8. Hospitality installations in ceilings with no power access
  9. Smart building IoT hubs requiring PoE+
  10. Environments transitioning to Wi‑Fi 6/6E with higher power needs

Unique Selling Propositions (USP)

  • Full 60 W UPoE support for the most power-hungry APs
  • Multigigabit data over one cable up to 5 Gb/s
  • Smart protection for overload, short-circuit, non‑compliance
  • Plug-and-play install with mounting tabs and integrated power supply
Port Type & Function Notes
Data In RJ‑45 5 GbE (from switch) For data only
Power+Data Out RJ‑45 5 GbE (to AP) – PoE+ & UPoE output Powers AP and provides full data speed
AC Input C14 connector (100–240 VAC) Includes power cable
LED State Meaning
Green Blink Idle w/ AC power Injector powered, awaiting device connection
Green Solid Active PoE Providing power to AP (30–60 W)
Rapid Blink Fault/Error No load, overload, or non‑compliant device
Overview
The Cisco AIR‑PWRINJ7= is a high‑capacity Power over Ethernet (PoE) midspan injector engineered to support the latest high-power Cisco access points, including Catalyst and Aironet models requiring up to 60 W via Cisco UPoE (802.3bt). It integrates both 5G multigigabit data and power delivery over a single Ethernet cable, eliminating the need for local AC power at access point locations. It dynamically negotiates power, delivering 54–57 V DC at up to 1.161 A, and will only power compliant devices—protecting non‑compliant gear from accidental damage Encased in a compact, mountable chassis with mounting tabs and a single status LED indicating power states, the AIR‑PWRINJ7= ensures reliable operation with high MTBF and worldwide AC compatibility while supporting fast Ethernet speeds up to 5 Gb/s. This injector is ideal for powering high-end Wi‑Fi 6/6E access points, IP cameras, network convergence hardware, and multigigabit DSLAMs in environment where power access is limited or costly.
Whats in the Box

What’s in the Box

  • 1× Cisco AIR‑PWRINJ7= power injector
  • Quick-installation and mounting guide
Use Case

Use Case Scenarios

  1. Catalyst 9100 and 9200 Series AP deployments without PoE switches
  2. High-performance outdoor APs needing 60 W power
  3. Audio-video systems requiring fast data and PoE
  4. Network convergence devices like NCS routers or edge switches
  5. Multigigabit capable IP cameras and security sensors
  6. Remote deployments and pop-up wireless networks
  7. Industrial mesh root nodes with high power demands
  8. Hospitality installations in ceilings with no power access
  9. Smart building IoT hubs requiring PoE+
  10. Environments transitioning to Wi‑Fi 6/6E with higher power needs
USP

Unique Selling Propositions (USP)

  • Full 60 W UPoE support for the most power-hungry APs
  • Multigigabit data over one cable up to 5 Gb/s
  • Smart protection for overload, short-circuit, non‑compliance
  • Plug-and-play install with mounting tabs and integrated power supply
Port Compatibility
Port Type & Function Notes
Data In RJ‑45 5 GbE (from switch) For data only
Power+Data Out RJ‑45 5 GbE (to AP) – PoE+ & UPoE output Powers AP and provides full data speed
AC Input C14 connector (100–240 VAC) Includes power cable
LED Behaviour
LED State Meaning
Green Blink Idle w/ AC power Injector powered, awaiting device connection
Green Solid Active PoE Providing power to AP (30–60 W)
Rapid Blink Fault/Error No load, overload, or non‑compliant device

More About Cisco AIR PWRINJ7= – 60 W Power Injector for Catalyst & Aironet APs (802.3bt / UPoE)

Cisco AIR PWRINJ7Why Choose Cisco AIR‑PWRINJ7=

  1. Powers modern Wi‑Fi 6/6E APs fully with UPoE
  2. Maintains gigabit data performance at full load
  3. Protects investment with Cisco-grade safety features
  4. Versatile installation—rack, wall, or ceiling
  5. Compatible across Catalyst and Aironet APs
  6. Supports transition to higher-power wireless deployments
  7. Simplifies infrastructure—one injector for multiple AP types
  8. Eliminates need to re-cable or replace switches
  9. Reduces network complexity and costs
  10. Backed by Cisco reliability and global support

 

Next Steps

  1. Verify your AP requires >30 W (Catalyst 9100/9200 etc.)
  2. Confirm Cat5e or better cabling is in place (up to 100 m)
  3. Mount the injector near a non‑PoE switch or AC outlet
  4. Order region-appropriate AC power cord
  5. Complete install and verify LED indicates solid green
  6. Document injector serial in your network asset database

Pre Sales Questions

We understand that making the right purchase decision is important. Below, you’ll find answers to common pre-sales questions about this product.

How much power can this deliver? +

Up to 60 W via 802.3bt UPoE (Cisco proprietary).

Which access points require this? +

Catalyst 9100/9200 series and high-end Aironet models needing >30 W

Does it support multigigabit? +

Yes, up to 5 Gb/s over CAT5e/CAT6

Is there built-in protection? +

Yes-surge, load, short, and disconnect safeguards.

What is the operating temperature? +

–10 °C to +40 °C at full load.

Can I mount it on a rack or wall? +

Yes-built-in tabs allow secure mounting.

Does it require configuration? +

No-all features work automatically via PoE.

Will non Cisco APs work? +

Only standards-compatible devices; Cisco non-compliant gear will be blocked.

How long can the cable be? +

Up to 100 m Cat5e or higher for both data and power.

What does a rapid blink mean? +

Indicates a fault—like invalid load or power issue.

Why Contact to Sales

Expert Guidance

Get advice to choose best products to meet technical requirements.

Enterprise Discounts

Get special pricing, discounts, or flexible payment options.

Integration Support

Setting up IT infrastructure requires seamless integration with your existing systems

Contact Sales

Get expert advice and unbeatable deal

Cisco AIR PWRINJ7
Cisco AIR PWRINJ7= – 60 W Power Injector for Catalyst & Aironet APs (802.3bt / UPoE)

Get the Best Deal

Get expert advice and unbeatable deals